pppoe nao autentica nem a pau....me ajudem...

ai galera sei la ja fiz de tudo formatei o servidor que esta o mk-auth configurei do jeito que ta no fum o mk. cadastrei o cliente , plano , e todo o resto. e criei a conexao pppoe na minha maquina pra testa, da nao tava conectando , de tanto tenta começo a autentica e dava erro 691. dai tentei tentei e começo a da erro 651. e nao vai nao conecta nem a pau.... eu pingo o ip da rb no mk-auth normal pingo ip do mkauth na rb normal eu ate setei um ip do range em uma maquina remota pra tenta acessa o mk-auth e acesso faço as auteraçoes que preciso. mas o lance que nao conecta nem a pau.... me ajuda galera. Tags: 691, 951, ajuda, cai, conexão, erro, pppoe, sistema meu sistema esta assim jan/02/1970 15:12:23 by RouterOS 4.10 # software id = NSBD-ITDV # /interface bridge add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \ comment="" disabled=no forward-delay=15s l2mtu=1524 max-message-age=20s \ mtu=1500 name=bridge priority=0x8000 protocol-mode=none \ transmit-hold-count=6 /interface ethernet set 0 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\ "" disabled=no full-duplex=yes l2mtu=1524 mac-address=00:0C:42:5E:F2:BA \ master-port=none mtu=1500 name=ether1-gateway speed=100Mbps set 1 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\ "" disabled=no full-duplex=yes l2mtu=1524 mac-address=00:0C:42:5E:F2:B6 \ master-port=none mtu=1500 name=ether2-local speed=100Mbps set 2 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\ "" disabled=no full-duplex=yes l2mtu=1524 mac-address=00:0C:42:5E:F2:B9 \ master-port=none mtu=1500 name=ether3-local speed=100Mbps set 3 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\ "" disabled=no full-duplex=yes l2mtu=1524 mac-address=00:0C:42:5E:F2:B8 \ master-port=none mtu=1500 name=ether4-local speed=100Mbps set 4 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\ "" disabled=no full-duplex=yes l2mtu=1524 mac-address=00:0C:42:5E:F2:B7 \ master-port=none mtu=1500 name=ether5-local speed=100Mbps /interface ethernet switch set switch1 mirror-source=none mirror-target=none name=switch1 /ip hotspot profile set default dns-name="" hotspot-address=0.0.0.0 html-directory=hotspot \ http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=cookie,http-chap \ name=default nas-port-type=ethernet radius-accounting=yes \ radius-default-domain="" radius-interim-update=received \ radius-location-id="" radius-location-name="" radius-mac-format=\ XX:XX:XX:XX:XX:XX rate-limit="" smtp-server=0.0.0.0 split-user-domain=no \ use-radius=yes /ip hotspot user profile set default idle-timeout=none keepalive-timeout=2m name=default shared-users=\ 1 status-autorefresh=1m transparent-proxy=no /ip ipsec proposal set default auth-algorithms=sha1 comment="" disabled=no enc-algorithms=3des \ lifetime=30m name=default pfs-group=modp1024 /ip pool add name="pool local 1" ranges=10.1.0.1-10.1.5.254 add name="pool remoto 1" ranges=10.2.0.1-10.2.5.254 /ip dhcp-server add address-pool="pool local 1" authoritative=after-2sec-delay bootp-support=\ static disabled=no interface=bridge lease-time=3d name=default /ppp profile set default change-tcp-mss=yes comment="" name=default only-one=default \ use-compression=default use-encryption=default use-vj-compression=default add change-tcp-mss=default comment="" dns-server=172.31.255.1 local-address=\ "pool local 1" name=pppoe only-one=default remote-address="pool remoto 1" \ use-compression=default use-encryption=yes use-vj-compression=default set default-encryption change-tcp-mss=yes comment="" name=default-encryption \ only-one=default use-compression=default use-encryption=yes \ use-vj-compression=default /queue type set default kind=pfifo name=default pfifo-limit=50 set ethernet-default kind=pfifo name=ethernet-default pfifo-limit=50 set wireless-default kind=sfq name=wireless-default sfq-allot=1514 \ sfq-perturb=5 set synchronous-default kind=red name=synchronous-default red-avg-packet=1000 \ red-burst=20 red-limit=60 red-max-threshold=50 red-min-threshold=10 set hotspot-default kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=\ 5 set default-small kind=pfifo name=default-small pfifo-limit=10 /routing bgp instance set default as=65530 client-to-client-reflection=yes comment="" disabled=no \ ignore-as-path-len=no name=default out-filter="" redistribute-connected=\ no redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \ redistribute-static=no router-id=0.0.0.0 routing-table="" /routing ospf instance set default comment="" disabled=no distribute-default=never in-filter=ospf-in \ metric-bgp=auto metric-connected=20 metric-default=1 metric-other-ospf=\ auto metric-rip=20 metric-static=20 name=default out-filter=ospf-out \ redistribute-bgp=no redistribute-connected=no redistribute-other-ospf=no \ redistribute-rip=no redistribute-static=no router-id=0.0.0.0 /routing ospf area set backbone area-id=0.0.0.0 comment="" disabled=no instance=default name=\ backbone type=default /snmp set contact="" enabled=no engine-boots=0 engine-id="" location="" \ time-window=15 trap-sink=0.0.0.0 trap-version=1 /snmp community set public address=0.0.0.0/0 authentication-password="" \ authentication-protocol=MD5 encryption-password="" encryption-protocol=\ DES name=public read-access=yes security=none write-access=no /system logging action set memory memory-lines=100 memory-stop-on-full=no name=memory target=memory set disk disk-file-count=2 disk-file-name=log disk-lines-per-file=100 \ disk-stop-on-full=no name=disk target=disk set echo name=echo remember=yes target=echo set remote bsd-syslog=no name=remote remote=0.0.0.0:514 src-address=0.0.0.0 \ syslog-facility=daemon syslog-severity=auto target=remote /system routerboard settings set boot-device=nand-if-fail-then-ethernet boot-protocol=bootp cpu-frequency=\ 680MHz force-backup-booter=no silent-boot=no set boot-device=nand-if-fail-then-ethernet boot-protocol=bootp cpu-frequency=\ 680MHz force-backup-booter=no silent-boot=no /user group add comment="" name=read policy="local,telnet,ssh,reboot,read,test,winbox,pass\ word,web,sniff,sensitive,!ftp,!write,!policy" add comment="" name=write policy="local,telnet,ssh,reboot,read,write,test,winb\ ox,password,web,sniff,sensitive,!ftp,!policy" add comment="" name=full policy="local,telnet,ssh,ftp,reboot,read,write,policy\ ,test,winbox,password,web,sniff,sensitive" /interface bridge port add bridge=bridge comment="" disabled=no edge=auto external-fdb=auto horizon=\ none interface=ether2-local path-cost=10 point-to-point=auto priority=\ 0x80 add bridge=bridge comment="" disabled=no edge=auto external-fdb=auto horizon=\ none interface=ether3-local path-cost=10 point-to-point=auto priority=\ 0x80 add bridge=bridge comment="" disabled=no edge=auto external-fdb=auto horizon=\ none interface=ether4-local path-cost=10 point-to-point=auto priority=\ 0x80 add bridge=bridge comment="" disabled=no edge=auto external-fdb=auto horizon=\ none interface=ether5-local path-cost=10 point-to-point=auto priority=\ 0x80 /interface bridge settings set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=\ no /interface ethernet switch port set (unknown) vlan-header=leave-as-is vlan-mode=fallback set (unknown) vlan-header=leave-as-is vlan-mode=fallback set (unknown) vlan-header=leave-as-is vlan-mode=fallback set (unknown) vlan-header=leave-as-is vlan-mode=fallback set (unknown) vlan-header=leave-as-is vlan-mode=fallback /interface l2tp-server server set authentication=pap,chap,mschap1,mschap2 default-profile=\ default-encryption enabled=no max-mru=1460 max-mtu=1460 mrru=disabled /interface ovpn-server server set auth=sha1,md5 certificate=none cipher=blowfish128,aes128 default-profile=\ default enabled=no keepalive-timeout=60 mac-address=FE:78:98:22:7D:57 \ max-mtu=1500 mode=ip netmask=24 port=1194 require-client-certificate=no /interface pppoe-server server add authentication=chap,mschap1,mschap2 default-profile=pppoe disabled=no \ interface=ether1-gateway keepalive-timeout=10 max-mru=1488 max-mtu=1488 \ max-sessions=0 mrru=disabled one-session-per-host=yes service-name=\ "servidor pppoe" /interface pptp-server server set authentication=mschap1,mschap2 default-profile=default-encryption \ enabled=no keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled /ip accounting set account-local-traffic=no enabled=no threshold=256 /ip accounting web-access set accessible-via-web=no address=0.0.0.0/0 /ip address add address=172.31.255.1/29 broadcast=172.31.255.7 comment=\ "default configuration" disabled=no interface=ether2-local network=\ 172.31.255.0 /ip dhcp-client add add-default-route=yes comment="default configuration" \ default-route-distance=1 disabled=no interface=ether1-gateway \ use-peer-dns=yes use-peer-ntp=yes /ip dhcp-server config set store-leases-disk=5m /ip dhcp-server network add address=172.31.255.0/29 comment="default configuration" dns-server=\ 172.31.255.1 gateway=172.31.255.1 /ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB \ max-udp-packet-size=512 servers=172.31.255.1 /ip dns static add address=172.31.255.1 comment="" disabled=no name=router ttl=1d /ip firewall connection tracking set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \ tcp-close-wait-timeout=10s tcp-established-timeout=1d \ tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \ tcp-syn-received-timeout=5s tcp-syn-sent-timeout=5s tcp-syncookie=no \ tcp-time-wait-timeout=10s udp-stream-timeout=3m udp-timeout=10s /ip firewall filter add action=accept chain=input comment="default configuration" disabled=no \ protocol=icmp add action=accept chain=input comment="default configuration" \ connection-state=established disabled=no in-interface=ether1-gateway add action=accept chain=input comment="default configuration" \ connection-state=related disabled=no in-interface=ether1-gateway add action=drop chain=input comment="default configuration" disabled=no \ in-interface=ether1-gateway /ip firewall nat add action=masquerade chain=srcnat comment="default configuration" disabled=\ no out-interface=ether1-gateway add action=dst-nat chain=dstnat comment="PG CORTE" disabled=no protocol=tcp \ src-address-list=pgcorte to-addresses=172.31.255.2 to-ports=85 add action=dst-nat chain=dstnat comment="AVISO MANUNTEN\C7\C3O" disabled=no \ protocol=tcp src-address=0.0.0.0 src-port=80 to-addresses=172.31.255.2 \ to-ports=89 /ip firewall service-port set ftp disabled=no ports=21 set tftp disabled=no ports=69 set irc disabled=no ports=6667 set h323 disabled=no set sip disabled=no ports=5060,5061 set pptp disabled=no /ip hotspot service-port set ftp disabled=no ports=21 /ip hotspot walled-garden add action=allow comment="" disabled=no dst-host=172.31.255.2 dst-port=80 add action=allow comment="" disabled=no dst-host=172.31.255.2 dst-port=85 /ip neighbor discovery set ether1-gateway discover=no set ether2-local discover=yes set ether3-local discover=yes set ether4-local discover=yes set ether5-local discover=yes set bridge discover=yes /ip proxy set always-from-cache=no cache-administrator=webmaster cache-hit-dscp=4 \ cache-on-disk=no enabled=no max-cache-size=none max-client-connections=\ 600 max-fresh-time=3d max-server-connections=600 parent-proxy=0.0.0.0 \ parent-proxy-port=0 port=8080 serialize-connections=no src-address=\ 0.0.0.0 /ip service set telnet address=0.0.0.0/0 disabled=no port=23 set ftp address=0.0.0.0/0 disabled=no port=21 set www address=0.0.0.0/0 disabled=no port=80 set ssh address=0.0.0.0/0 disabled=no port=22 set www-ssl address=0.0.0.0/0 certificate=none disabled=yes port=443 set api address=0.0.0.0/0 disabled=yes port=8728 set winbox address=0.0.0.0/0 disabled=no port=8291 /ip socks set connection-idle-timeout=2m enabled=no max-connections=200 port=1080 /ip traffic-flow set active-flow-timeout=30m cache-entries=4k enabled=no \ inactive-flow-timeout=15s interfaces=all /ip upnp set allow-disable-external-interface=yes enabled=no show-dummy-rule=yes /mpls set dynamic-label-range=16-1048575 propagate-ttl=yes /mpls interface add comment="" disabled=no interface=all mpls-mtu=1508 /mpls ldp set distribute-for-default-route=no enabled=no hop-limit=255 loop-detect=no \ lsr-id=0.0.0.0 path-vector-limit=255 transport-address=0.0.0.0 \ use-explicit-null=no /ppp aaa set accounting=yes interim-update=3m use-radius=yes /queue interface set ether1-gateway queue=ethernet-default set ether2-local queue=ethernet-default set ether3-local queue=ethernet-default set ether4-local queue=ethernet-default set ether5-local queue=ethernet-default set bridge queue=default /radius add accounting-backup=no accounting-port=1813 address=172.31.25.2 \ authentication-port=1812 called-id="" comment="" disabled=no domain="" \ realm="" secret=123456 service=ppp,hotspot,wireless timeout=300ms /radius incoming set accept=no port=3799 /routing bfd interface set all comment="" disabled=no interface=all interval=0.2sec min-rx=0.2sec \ multiplier=5 /routing mme set bidirectional-timeout=2 gateway-class=none gateway-keepalive=1m \ gateway-selection=no-gateway origination-interval=5s preferred-gateway=\ 0.0.0.0 timeout=1m ttl=50 /routing rip set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 \ metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \ redistribute-connected=no redistribute-ospf=no redistribute-static=no \ routing-table=main timeout-timer=3m update-timer=30s /store add comment="" disabled=no disk=system name=web-proxy1 type=web-proxy /system clock set time-zone-name=manual /system clock manual set dst-delta=+00:00 dst-end="jan/01/1970 00:00:00" dst-start=\ "jan/01/1970 00:00:00" time-zone=+00:00 /system console add disabled=no term=vt102 /system health set /system identity set name=MikroTik /system logging add action=memory disabled=no prefix="" topics=info add action=memory disabled=no prefix="" topics=error add action=memory disabled=no prefix="" topics=warning add action=echo disabled=no prefix="" topics=critical /system note set note="" show-at-login=yes /system ntp client set enabled=no mode=broadcast primary-ntp=0.0.0.0 secondary-ntp=0.0.0.0 /system upgrade mirror set check-interval=1d enabled=no primary-server=0.0.0.0 secondary-server=\ 0.0.0.0 user="" /system watchdog set auto-send-supout=no automatic-supout=yes no-ping-delay=5m watch-address=\ none watchdog-timer=yes /tool bandwidth-server set allocate-udp-ports-from=2000 authenticate=yes enabled=yes max-sessions=\ 100 /tool e-mail set from=<> password="" server=0.0.0.0:25 username="" /tool graphing set page-refresh=300 store-every=5min /tool mac-server add disabled=no interface=ether2-local add disabled=no interface=ether3-local add disabled=no interface=ether4-local add disabled=no interface=ether5-local /tool mac-server ping set enabled=yes /tool sms set allowed-number="" channel=0 keep-max-sms=0 receive-enabled=no secret="" /tool sniffer set file-limit=10 file-name="" filter-address1=0.0.0.0/0:0-65535 \ filter-address2=0.0.0.0/0:0-65535 filter-protocol=ip-only filter-stream=\ yes interface=all memory-limit=10 memory-scroll=no only-headers=no \ streaming-enabled=no streaming-server=0.0.0.0 /user aaa set accounting=yes default-group=read interim-update=0s use-radius=no /user ssh-keys set (unknown) user=mkauth [admin@MikroTik] >

Forum

pppoe nao autentica nem a pau....me ajudem...

Respostas