Forum

Amigos do forum;
me encontro com um problema que vem me tirando a paz, utilizava pagina de aviso com netwatch normalmente, porem apos implementar um load balance (rb450g) quando um link cai ao voltar o netwatch nao consegue pingar, e mesmo que um link caia nao é para a regra ser ativada pois o outro link continua funcionando.

segue regras do load balance.

/interface ethernet
set [ find default-name=ether4 ] master-port=ether1
set [ find default-name=ether5 ] master-port=ether1
/interface pppoe-client
add disabled=no interface=ether2 max-mru=1480 max-mtu=1480 name=adsl_ether2 \
password=gvt25 user=turbonet@turbonet
add disabled=no interface=ether3 max-mru=1480 max-mtu=1480 name=adsl_ether3 \
password=gvt25 user=turbonet@turbonet
/interface ethernet switch port
set 3 vlan-header=always-strip vlan-mode=disabled
/ip pool
add name=dhcp_pool1 ranges=10.0.0.2-10.0.0.254
add name=PPTP-pool ranges=192.168.2.1,192.168.2.254
/ip dhcp-server
add address-pool=dhcp_pool1 disabled=no interface=ether1 lease-time=3d name=\
dhcp1
/port
set 0 name=serial0
/ppp profile
add local-address=PPTP-pool name=PPTP-profile remote-address=PPTP-pool
/interface l2tp-server server
set default-profile=default
/interface pptp-server server
set authentication=pap,chap,mschap1,mschap2 default-profile=default enabled=\
yes
/ip address
add address=10.0.0.1/24 interface=ether1 network=10.0.0.0
/ip cloud
set ddns-enabled=yes
/ip dhcp-server lease
add address=10.0.0.2 client-id=1:0:1a:3f:a3:73:fa mac-address=\
00:1A:3F:A3:73:FA server=dhcp1
/ip dhcp-server network
add address=10.0.0.0/24 gateway=10.0.0.1
/ip dns
set allow-remote-requests=yes servers=8.8.8.8,8.8.4.4
/ip firewall address-list
add address=200.155.80.0-200.155.255.255 comment=BRADESCO list=LINK0
add address=200.220.186.0/24 list=LINK0
add address=200.220.178.0/24 list=LINK0
add address=200.155.80.0-200.155.255.255 comment=BRADESCO list=loopback
add address=200.220.186.0/24 comment=BRADESCO list=loopback
add address=200.220.178.0/24 comment=BRADESCO list=loopback
add address=64.38.29.0/24 comment=RapidShare list=loopback
add address=208.69.32.0/24 list=loopback
add address=208.67.217.0/24 list=loopback
add address=201.7.178.0/24 list=loopback
add address=201.7.176.0/24 list=loopback
add address=200.159.128.0/24 comment=BRADESCO list=loopback
add address=201.7.176.0/20 comment="Vdeos - Globo" list=loopback
add address=208.84.247.0/24 comment="Vdeos - terratv" list=loopback
add address=200.154.56.0/24 comment="Vdeos - terratv" list=loopback
add address=200.201.160.0/24 comment="Caixa Economica Federal" list=loopback
add address=200.201.166.0/24 list=loopback
add address=200.201.173.0/24 list=loopback
add address=200.201.174.0/24 list=loopback
add address=200.141.207.3 comment=Detran list=loopback
add address=200.160.2.3 list=loopback
/ip firewall filter
add chain=input dst-port=1723 protocol=tcp
add chain=input protocol=gre
/ip firewall mangle
add action=mark-connection chain=prerouting connection-state=new \
dst-address-list=LINK0 in-interface=ether1 new-connection-mark=Sites0
add action=mark-routing chain=prerouting connection-mark=Sites0 in-interface=\
ether1 new-routing-mark=Rota0 passthrough=no
add chain=prerouting comment="FORA DO LOADBALACED" dst-address-list=loopback \
in-interface=ether1
add action=mark-connection chain=prerouting connection-state=new \
in-interface=adsl_ether2 new-connection-mark=adsl_ether2_conn
add action=mark-connection chain=prerouting connection-state=new \
in-interface=adsl_ether3 new-connection-mark=adsl_ether3_conn
add action=mark-routing chain=output connection-mark=adsl_ether2_conn \
new-routing-mark=to_adsl_ether2
add action=mark-routing chain=output connection-mark=adsl_ether3_conn \
new-routing-mark=to_adsl_ether3
add action=mark-connection chain=prerouting connection-state=new \
dst-address-type=!local in-interface=ether1 new-connection-mark=\
adsl_ether2_conn per-connection-classifier=both-addresses-and-ports:2/0
add action=mark-connection chain=prerouting connection-state=new \
dst-address-type=!local in-interface=ether1 new-connection-mark=\
adsl_ether3_conn per-connection-classifier=both-addresses-and-ports:2/1
add action=mark-routing chain=prerouting connection-mark=adsl_ether2_conn \
in-interface=ether1 new-routing-mark=to_adsl_ether2
add action=mark-routing chain=prerouting connection-mark=adsl_ether3_conn \
in-interface=ether1 new-routing-mark=to_adsl_ether3
/ip firewall nat
add action=masquerade chain=srcnat out-interface=adsl_ether2
add action=masquerade chain=srcnat out-interface=adsl_ether3
add action=masquerade chain=srcnat src-address=192.168.2.0/24
add action=dst-nat chain=dstnat dst-port=80 in-interface=all-ppp protocol=tcp \
to-addresses=10.0.0.2 to-ports=80
/ip route
add distance=1 gateway=adsl_ether2 routing-mark=Rota0
add comment=Link0 distance=1 gateway=adsl_ether2 routing-mark=to_adsl_ether2
add comment=Link1 distance=1 gateway=adsl_ether3 routing-mark=to_adsl_ether3
add comment=Link0 distance=1 gateway=adsl_ether2
add comment=Link1 distance=2 gateway=adsl_ether3
/ip service
set telnet disabled=yes
set www disabled=yes
set ssh disabled=yes
set api-ssl disabled=yes
/romon port
add disabled=no
/system clock
set time-zone-name=America/Recife
/system routerboard settings
set cpu-frequency=800MHz