Respostas

  • se precisar dele completo so fala

  • O que está faltando?
  • A regra que integra o polyci router  

    tem video aqui mostra ele completinho so nun tem parte de sem lonad balance e rotas seguras
    https://www.youtube.com/watch?v=Iu_d7Xcks_0

    esse video ai ensina fazer ele e mas facil pra ver se caso tiver alguma duvida sobre pesos e divisão do link terei praser em te ajudar
    Luiz Paulo disse:

    O que está faltando?
  • gostei, valeu parceiro!!!



    Eder Amaral disse:

    A regra que integra o polyci router  

    tem video aqui mostra ele completinho so nun tem parte de sem lonad balance e rotas seguras
    https://www.youtube.com/watch?v=Iu_d7Xcks_0

    esse video ai ensina fazer ele e mas facil pra ver se caso tiver alguma duvida sobre pesos e divisão do link terei praser em te ajudar
    Luiz Paulo disse:

    O que está faltando?
  • Boa noite amigos, preciso de ajuda com meu load balance esta havendo algum problema com cargas no momento só esta consumindo o link1 estou fazendo load com 4 links modems roteados. Se alguem estiver disposto a me ajudar eu agradeço.

  • Judisson, bota ai tuas regras mangle para vermos o problema.
  • Boa noite amigos, segue abaixo minhas regras de Mangle.

    /ip firewall mangle
    add action=accept chain=prerouting comment=\
    "====================================================================" \
    disabled=no dst-address=192.168.88.0/30 src-address=192.168.88.0/30
    add action=accept chain=prerouting disabled=no dst-address=192.168.1.0/30 \
    src-address=192.168.88.0/30
    add action=accept chain=prerouting disabled=no dst-address=192.168.150.0/30 \
    src-address=192.168.88.0/30
    add action=accept chain=prerouting disabled=no dst-address=192.168.2.0/30 \
    src-address=192.168.88.0/30
    add action=accept chain=prerouting disabled=no dst-address=192.168.151.0/30 \
    src-address=192.168.88.0/30
    add action=mark-connection chain=prerouting comment=\
    "====================================================================" \
    connection-mark=no-mark disabled=no in-interface=Link1 \
    new-connection-mark=Link1_conn passthrough=yes
    add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
    no in-interface=Link2 new-connection-mark=Link2_conn passthrough=yes
    add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
    no in-interface=Link3 new-connection-mark=Link3_conn passthrough=yes
    add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
    no in-interface=Link4 new-connection-mark=Link4_conn passthrough=yes
    add action=jump chain=prerouting comment=\
    "====================================================================" \
    connection-mark=no-mark disabled=no in-interface=Lan jump-target=\
    policy_router
    add action=mark-routing chain=prerouting comment=\
    "====================================================================" \
    connection-mark=Link1_conn disabled=no new-routing-mark=Link1_trafic \
    passthrough=yes src-address=192.168.88.0/30
    add action=mark-routing chain=prerouting connection-mark=Link2_conn disabled=\
    no new-routing-mark=Link2_trafic passthrough=yes src-address=\
    192.168.88.0/30
    add action=mark-routing chain=prerouting connection-mark=Link3_conn disabled=\
    no new-routing-mark=Link3_trafic passthrough=yes src-address=\
    192.168.88.0/30
    add action=mark-routing chain=prerouting connection-mark=Link4_conn disabled=\
    no new-routing-mark=Link4_trafic passthrough=yes src-address=\
    192.168.88.0/30
    add action=mark-routing chain=output comment=\
    "====================================================================" \
    connection-mark=Link1_conn disabled=no new-routing-mark=Link1_trafic \
    passthrough=yes
    add action=mark-routing chain=output connection-mark=Link2_conn disabled=no \
    new-routing-mark=Link2_trafic passthrough=yes
    add action=mark-routing chain=output connection-mark=Link3_conn disabled=no \
    new-routing-mark=Link3_trafic passthrough=yes
    add action=mark-routing chain=output connection-mark=Link4_conn disabled=no \
    new-routing-mark=Link4_trafic passthrough=yes
    add action=mark-connection chain=policy_router comment=\
    "====================================================================" \
    disabled=no dst-address-type=!local new-connection-mark=Link1_conn \
    passthrough=yes per-connection-classifier=both-addresses:4/0 psd=\
    21,3s,3,1
    add action=mark-connection chain=policy_router disabled=no dst-address-type=\
    !local new-connection-mark=Link2_conn passthrough=yes \
    per-connection-classifier=both-addresses:4/1 psd=21,3s,3,1
    add action=mark-connection chain=policy_router disabled=no dst-address-type=\
    !local new-connection-mark=Link3_conn passthrough=yes \
    per-connection-classifier=both-addresses:4/2 psd=21,3s,3,1
    add action=mark-connection chain=policy_router disabled=no dst-address-type=\
    !local new-connection-mark=Link4_conn passthrough=yes \
    per-connection-classifier=both-addresses:4/3 psd=21,3s,3,1

    Estou com uma grande dificuldade para fazer o balanceamento com o consumo iguais dos Links, se alguem conseguir me ajudar eu agradeço desde ja.

  • Luiz, se voce quiser me ajudar eu estou a disposição....

    Luiz Paulo disse:

    Judisson, bota ai tuas regras mangle para vermos o problema.
  • Eder boa tarde, qto vc cobra p configurar meu load, trabalho com dois link dedicado, cada um de 10 mega

  • pessoal tenho dois links um de 100 e um de 50 gostaria de uma ajuda de vocês no balance fiz dois aqui e não deu certo rsrsrs. Sinto a navegação travando quando coloco o balance se coloco so o link de 100 fica lisa a navegação. Alguém pode me ajudar no balance.

This reply was deleted.