Se alguem precisar, aqui vai um load-balance perfeito rodando a quase 1 ano sem reboot.
Para adicionar comentários, você deve ser membro de MK-AUTH.
This reply was deleted.
Se alguem precisar, aqui vai um load-balance perfeito rodando a quase 1 ano sem reboot.
Para adicionar comentários, você deve ser membro de MK-AUTH.
Respostas
se precisar dele completo so fala
A regra que integra o polyci router
tem video aqui mostra ele completinho so nun tem parte de sem lonad balance e rotas seguras
https://www.youtube.com/watch?v=Iu_d7Xcks_0
esse video ai ensina fazer ele e mas facil pra ver se caso tiver alguma duvida sobre pesos e divisão do link terei praser em te ajudar
Luiz Paulo disse:
gostei, valeu parceiro!!!
Eder Amaral disse:
Boa noite amigos, preciso de ajuda com meu load balance esta havendo algum problema com cargas no momento só esta consumindo o link1 estou fazendo load com 4 links modems roteados. Se alguem estiver disposto a me ajudar eu agradeço.
Boa noite amigos, segue abaixo minhas regras de Mangle.
/ip firewall mangle
add action=accept chain=prerouting comment=\
"====================================================================" \
disabled=no dst-address=192.168.88.0/30 src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.1.0/30 \
src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.150.0/30 \
src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.2.0/30 \
src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.151.0/30 \
src-address=192.168.88.0/30
add action=mark-connection chain=prerouting comment=\
"====================================================================" \
connection-mark=no-mark disabled=no in-interface=Link1 \
new-connection-mark=Link1_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no in-interface=Link2 new-connection-mark=Link2_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no in-interface=Link3 new-connection-mark=Link3_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no in-interface=Link4 new-connection-mark=Link4_conn passthrough=yes
add action=jump chain=prerouting comment=\
"====================================================================" \
connection-mark=no-mark disabled=no in-interface=Lan jump-target=\
policy_router
add action=mark-routing chain=prerouting comment=\
"====================================================================" \
connection-mark=Link1_conn disabled=no new-routing-mark=Link1_trafic \
passthrough=yes src-address=192.168.88.0/30
add action=mark-routing chain=prerouting connection-mark=Link2_conn disabled=\
no new-routing-mark=Link2_trafic passthrough=yes src-address=\
192.168.88.0/30
add action=mark-routing chain=prerouting connection-mark=Link3_conn disabled=\
no new-routing-mark=Link3_trafic passthrough=yes src-address=\
192.168.88.0/30
add action=mark-routing chain=prerouting connection-mark=Link4_conn disabled=\
no new-routing-mark=Link4_trafic passthrough=yes src-address=\
192.168.88.0/30
add action=mark-routing chain=output comment=\
"====================================================================" \
connection-mark=Link1_conn disabled=no new-routing-mark=Link1_trafic \
passthrough=yes
add action=mark-routing chain=output connection-mark=Link2_conn disabled=no \
new-routing-mark=Link2_trafic passthrough=yes
add action=mark-routing chain=output connection-mark=Link3_conn disabled=no \
new-routing-mark=Link3_trafic passthrough=yes
add action=mark-routing chain=output connection-mark=Link4_conn disabled=no \
new-routing-mark=Link4_trafic passthrough=yes
add action=mark-connection chain=policy_router comment=\
"====================================================================" \
disabled=no dst-address-type=!local new-connection-mark=Link1_conn \
passthrough=yes per-connection-classifier=both-addresses:4/0 psd=\
21,3s,3,1
add action=mark-connection chain=policy_router disabled=no dst-address-type=\
!local new-connection-mark=Link2_conn passthrough=yes \
per-connection-classifier=both-addresses:4/1 psd=21,3s,3,1
add action=mark-connection chain=policy_router disabled=no dst-address-type=\
!local new-connection-mark=Link3_conn passthrough=yes \
per-connection-classifier=both-addresses:4/2 psd=21,3s,3,1
add action=mark-connection chain=policy_router disabled=no dst-address-type=\
!local new-connection-mark=Link4_conn passthrough=yes \
per-connection-classifier=both-addresses:4/3 psd=21,3s,3,1
Estou com uma grande dificuldade para fazer o balanceamento com o consumo iguais dos Links, se alguem conseguir me ajudar eu agradeço desde ja.
Luiz, se voce quiser me ajudar eu estou a disposição....
Luiz Paulo disse:
Eder boa tarde, qto vc cobra p configurar meu load, trabalho com dois link dedicado, cada um de 10 mega
pessoal tenho dois links um de 100 e um de 50 gostaria de uma ajuda de vocês no balance fiz dois aqui e não deu certo rsrsrs. Sinto a navegação travando quando coloco o balance se coloco so o link de 100 fica lisa a navegação. Alguém pode me ajudar no balance.
-
1
-
2
de 2 Próximo