Se alguem precisar, aqui vai um load-balance perfeito rodando a quase 1 ano sem reboot.
Para adicionar comentários, você deve ser membro de MK-AUTH.
This reply was deleted.
Se alguem precisar, aqui vai um load-balance perfeito rodando a quase 1 ano sem reboot.
Para adicionar comentários, você deve ser membro de MK-AUTH.
Respostas
34-99178-2818
pessoal tenho dois links um de 100 e um de 50 gostaria de uma ajuda de vocês no balance fiz dois aqui e não deu certo rsrsrs. Sinto a navegação travando quando coloco o balance se coloco so o link de 100 fica lisa a navegação. Alguém pode me ajudar no balance.
Eder boa tarde, qto vc cobra p configurar meu load, trabalho com dois link dedicado, cada um de 10 mega
Luiz, se voce quiser me ajudar eu estou a disposição....
Luiz Paulo disse:
Boa noite amigos, segue abaixo minhas regras de Mangle.
/ip firewall mangle
add action=accept chain=prerouting comment=\
"====================================================================" \
disabled=no dst-address=192.168.88.0/30 src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.1.0/30 \
src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.150.0/30 \
src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.2.0/30 \
src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.151.0/30 \
src-address=192.168.88.0/30
add action=mark-connection chain=prerouting comment=\
"====================================================================" \
connection-mark=no-mark disabled=no in-interface=Link1 \
new-connection-mark=Link1_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no in-interface=Link2 new-connection-mark=Link2_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no in-interface=Link3 new-connection-mark=Link3_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no in-interface=Link4 new-connection-mark=Link4_conn passthrough=yes
add action=jump chain=prerouting comment=\
"====================================================================" \
connection-mark=no-mark disabled=no in-interface=Lan jump-target=\
policy_router
add action=mark-routing chain=prerouting comment=\
"====================================================================" \
connection-mark=Link1_conn disabled=no new-routing-mark=Link1_trafic \
passthrough=yes src-address=192.168.88.0/30
add action=mark-routing chain=prerouting connection-mark=Link2_conn disabled=\
no new-routing-mark=Link2_trafic passthrough=yes src-address=\
192.168.88.0/30
add action=mark-routing chain=prerouting connection-mark=Link3_conn disabled=\
no new-routing-mark=Link3_trafic passthrough=yes src-address=\
192.168.88.0/30
add action=mark-routing chain=prerouting connection-mark=Link4_conn disabled=\
no new-routing-mark=Link4_trafic passthrough=yes src-address=\
192.168.88.0/30
add action=mark-routing chain=output comment=\
"====================================================================" \
connection-mark=Link1_conn disabled=no new-routing-mark=Link1_trafic \
passthrough=yes
add action=mark-routing chain=output connection-mark=Link2_conn disabled=no \
new-routing-mark=Link2_trafic passthrough=yes
add action=mark-routing chain=output connection-mark=Link3_conn disabled=no \
new-routing-mark=Link3_trafic passthrough=yes
add action=mark-routing chain=output connection-mark=Link4_conn disabled=no \
new-routing-mark=Link4_trafic passthrough=yes
add action=mark-connection chain=policy_router comment=\
"====================================================================" \
disabled=no dst-address-type=!local new-connection-mark=Link1_conn \
passthrough=yes per-connection-classifier=both-addresses:4/0 psd=\
21,3s,3,1
add action=mark-connection chain=policy_router disabled=no dst-address-type=\
!local new-connection-mark=Link2_conn passthrough=yes \
per-connection-classifier=both-addresses:4/1 psd=21,3s,3,1
add action=mark-connection chain=policy_router disabled=no dst-address-type=\
!local new-connection-mark=Link3_conn passthrough=yes \
per-connection-classifier=both-addresses:4/2 psd=21,3s,3,1
add action=mark-connection chain=policy_router disabled=no dst-address-type=\
!local new-connection-mark=Link4_conn passthrough=yes \
per-connection-classifier=both-addresses:4/3 psd=21,3s,3,1
Estou com uma grande dificuldade para fazer o balanceamento com o consumo iguais dos Links, se alguem conseguir me ajudar eu agradeço desde ja.
Boa noite amigos, preciso de ajuda com meu load balance esta havendo algum problema com cargas no momento só esta consumindo o link1 estou fazendo load com 4 links modems roteados. Se alguem estiver disposto a me ajudar eu agradeço.
gostei, valeu parceiro!!!
Eder Amaral disse:
A regra que integra o polyci router
tem video aqui mostra ele completinho so nun tem parte de sem lonad balance e rotas seguras
https://www.youtube.com/watch?v=Iu_d7Xcks_0
esse video ai ensina fazer ele e mas facil pra ver se caso tiver alguma duvida sobre pesos e divisão do link terei praser em te ajudar
Luiz Paulo disse:
-
1
-
2
de 2 Próximo