Forum

Respostas

  • Cabral Telecom Novembro 3, 2011 15:46

    Acompanhando...

  • Luciano Kalinoski Novembro 4, 2011 0:21

    Acompanhando...

  • Harlen Silveira Pinho Novembro 4, 2011 0:25

    acompanhando(3)

  • Pedro Filho Novembro 4, 2011 23:44

    não, vc pode fazer isso alterando o profile default do hotspot...

  • marcelo nunes rodrigues Novembro 5, 2011 14:40

    obrigado pedro pela resposta, mas me fale, e na config PPPOE, onde podemos fazer esta limitacao?

  • marcelo nunes rodrigues Agosto 30, 2012 19:44

    solucao interessante de algum colega do under

    IP > FIREWALL > MANGLE

    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=21 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes \
    comment="Marcando Pacotes Sem Limite Conexao" disabled=no
    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=22 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes comment="" \
    disabled=no
    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=23 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes comment="" \
    disabled=no
    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=25 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes comment="" \
    disabled=no
    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=53 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes comment="" \
    disabled=no
    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=80 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes comment="" \
    disabled=no
    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=110 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes comment="" \
    disabled=no
    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=443 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes comment="" \
    disabled=no
    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=8080 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes comment="" \
    disabled=no
    add chain=forward src-address=10.0.0.0/8 protocol=tcp dst-port=6891-6901 \
    action=mark-packet new-packet-mark=semlimite passthrough=yes comment="" \
    disabled=no



    IP > FIREWALL > FILTER

    add chain=forward src-address=10.0.0.0/8 protocol=tcp tcp-flags=syn \
    packet-mark=!semlimite connection-limit=25,32 action=drop comment="Limitando \
    numero conexoes simultaneas 25 por cliente" disabled=no

  • carlos de almeida Agosto 30, 2012 20:40

    acompanhando

This reply was deleted.