Bom dia amigos do forum, estou precisando de ajuda com Load Balance pois não sei o que eu fiz de arrado e o consumo só esta sendo de um link só, vejam abaixo minhas regras de Mangle.
/ip firewall mangle
add action=accept chain=prerouting comment=\
"====================================================================" \
disabled=no dst-address=192.168.88.0/30 src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.1.0/30 \
src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.150.0/30 \
src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.2.0/30 \
src-address=192.168.88.0/30
add action=accept chain=prerouting disabled=no dst-address=192.168.151.0/30 \
src-address=192.168.88.0/30
add action=mark-connection chain=prerouting comment=\
"====================================================================" \
connection-mark=no-mark disabled=no in-interface=Link1 new-connection-mark=\
Link1_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=no \
in-interface=Link2 new-connection-mark=Link2_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=no \
in-interface=Link3 new-connection-mark=Link3_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=no \
in-interface=Link4 new-connection-mark=Link4_conn passthrough=yes
add action=jump chain=prerouting comment=\
"====================================================================" \
connection-mark=no-mark disabled=no in-interface=Lan jump-target=\
policy_router
add action=mark-routing chain=prerouting comment=\
"====================================================================" \
connection-mark=Link1_conn disabled=no new-routing-mark=Link1_trafic \
passthrough=yes src-address=192.168.88.0/30
add action=mark-routing chain=prerouting connection-mark=Link2_conn disabled=no \
new-routing-mark=Link2_trafic passthrough=yes src-address=192.168.88.0/30
add action=mark-routing chain=prerouting connection-mark=Link3_conn disabled=no \
new-routing-mark=Link3_trafic passthrough=yes src-address=192.168.88.0/30
add action=mark-routing chain=prerouting connection-mark=Link4_conn disabled=no \
new-routing-mark=Link4_trafic passthrough=yes src-address=192.168.88.0/30
add action=mark-routing chain=output comment=\
"============================================
connection-mark=Link1_conn disabled=no new-ro
passthrough=yes
add action=mark-routing chain=output connection-m
new-routing-mark=Link2_trafic passthrough=yes
add action=mark-routing chain=output connection-m
new-routing-mark=Link3_trafic passthrough=yes
add action=mark-routing chain=output connection-m
new-routing-mark=Link4_trafic passthrough=yes
add action=mark-connection chain=policy_router co
"============================================
disabled=no dst-address-type=!local new-conne
passthrough=yes per-connection-classifier=bot
add action=mark-connection chain=policy_router di
!local new-connection-mark=Link2_conn passthr
per-connection-classifier=both-addresses:4/1
add action=mark-connection chain=policy_router di
!local new-connection-mark=Link3_conn passthr
per-connection-classifier=both-addresses:4/2
add action=mark-connection chain=policy_router di
!local new-connection-mark=Link4_conn passthr
per-connection-classifier=both-addresses:4/3
regras de Nat.
/ip firewall nat
add action=masquerade chain=srcnat disabled=no out-interface=Link1
add action=masquerade chain=srcnat disabled=no out-interface=Link2
add action=masquerade chain=srcnat disabled=no out-interface=Link3
add action=masquerade chain=srcnat disabled=no out-interface=Link4
regras de router.
/ip route
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168
Link1_trafic scope=30 target-scope=10
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168
Link2_trafic scope=30 target-scope=10
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168
Link3_trafic scope=30 target-scope=10
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168
Link4_trafic scope=30 target-scope=10
add disabled=no distance=2 dst-address=0.0.0.0/0 gateway=192.168
target-scope=10
add disabled=no distance=3 dst-address=0.0.0.0/0 gateway=192.168
target-scope=10
add disabled=no distance=4 dst-address=0.0.0.0/0 gateway=192.168
target-scope=10
add disabled=no distance=5 dst-address=0.0.0.0/0 gateway=192.168
target-scope=10
regras de DNS.
/ip dns
set allow-remote-requests=yes cache-max-ttl=1w cache-size=20480KiB \
max-udp-packet-size=512 servers=8.8.8.8,8.8.4.4
Se alguem puder me ajudar é só me add no msn jud.hud.rhianna@hotmail.com
Respostas
Maycon, muito obrigado pela atenção mas eu fiz desse mesmo jeitinho ai tambem mas não adiantou.
maycon marques carino disse:
Ok Rogério, ja te add no msn assim que puder me dar um suporte estarei a disposição.
da uma olhada nas regras do both
se vc tem 4 links as ordens sao 4/0 - 4/1 - 4/2 - 4/3
=============================================
disabled=no dst-address-type=!local new-conne
passthrough=yes per-connection-classifier=bot
add action=mark-connection chain=policy_router di
!local new-connection-mark=Link2_conn passthr
per-connection-classifier=both-addresses:4/1 <<<<<erro 4/0
add action=mark-connection chain=policy_router di
!local new-connection-mark=Link3_conn passthr
per-connection-classifier=both-addresses:4/2 <<<< erro 4/1
add action=mark-connection chain=policy_router di
!local new-connection-mark=Link4_conn passthr
per-connection-classifier=both-addresses:4/3 <<<<<<< ERRO 4/2
======================================
posso ta errado mais provavelmente pode ser issu!
Se precisar de suporte so add rogerioapedroso@pop.com.br, mais te adianto que esse balance ai não fuciona, nem sei quem foi o doido que inventou ele, mais ja tirei varios loads com essas regras ai, e nenhum funcionava...
Precisando muito desse Balanceamento...afffff